WAN Subsystem Configuration and Management Manual

Configuration Quick Start
WAN Subsystem Configuration and Management Manual—522463-011
1-17
Determining the Initial Configuration of a SWAN
Concentrator
Example 1-8 shows an SCF INFO PATH command display for a SWAN concentrator
named $ZZWAN.#S01:
Determining the Initial WAN Port Configuration
All six or twelve (depending on the type of concentrator) WAN ports on the SWAN
concentrator are configured and started by HP manufacturing as ATP6100 devices for
testing purposes. The ATP6100 subsystem provides the means for an application
program to use asynchronous point-to-point terminals, printers, and other devices
connected through the SWAN concentrator.
Use the SCF NAMES DEVICE command to display the names of all the devices
configured on your system. The command syntax is:
Example 1-8. Sample SCF INFO PATH Command Display
info path $zzwan.#S01.*
WAN MANAGER Detailed Info Path \MYSYS.$ZZWAN.#S01.1.A
*IPADDRESS ....... 172.016.035.024
WAN MANAGER Detailed Info Path \MYSYS.$ZZWAN.#S01.1.B
*IPADDRESS ....... 172.016.045.024
WAN MANAGER Detailed Info Path \MYSYS.$ZZWAN.#S01.2.A
*IPADDRESS ....... 172.016.035.025
WAN MANAGER Detailed Info Path \MYSYS.$ZZWAN.#S01.2.B
*IPADDRESS ....... 172.016.045.025
WAN MANAGER Detailed Info Path \MYSYS.$ZZWAN.#S01.3.A
*IPADDRESS ....... 172.016.035.026
WAN MANAGER Detailed Info Path \MYSYS.$ZZWAN.#S01.3.B
*IPADDRESS ....... 172.016.045.026
NAMES DEVICE $ZZWAN.#*
Example 1-9. Sample SCF NAMES DEVICE Command Display
names device $zzwan.#*
WANMgr Names DEVICE $ZZWAN.#*
DEVICE
$ZZWAN.#S3P1
$ZZWAN.#S3S1
$ZZWAN.#S3P2
$ZZWAN.#S3S2
$ZZWAN.#S3P3
$ZZWAN.#S3S3