WAN Subsystem Configuration and Management Manual

Configuration Quick Start
WAN Subsystem Configuration and Management Manual—522463-011
1-23
Starting a Route
The command syntax for G06.27 and later RVUs and H06.03 and later RVUs is:
nn
is the last three characters of the TCP/IP process name for which the SUBNET is
configured.
subnet
is the name of the SUBNET you want to start.
Starting a Route
If a TCP/IP route is not in the STARTED state, use the SCF START ROUTE command
to start it.
The command syntax for G06.26 and earlier RVUs is:
nnn
is the last three characters of the TCP/IP process name for which the route is
configured.
route
is the name of the route you want to start. If the SWAN concentrator is in a routed
environment, you must specify the TCP/IP routes.
The command syntax for G06.27 and later RVUs and H06.03 and later RVUs is:
nn
is the last three characters of the TCP/IP process name for which the SUBNET is
configured.
subnet
is the name of the SUBNET you want to start.
Starting a WAN Subsystem Object
The follow subsections explain how to start each of the WAN subsystem objects.
START SUBNET $ZTCnn.#subnet
START ROUTE $ZBnnn.#route
START ROUTE $ZTCnn.#route