WAN Subsystem Configuration and Management Manual

Configuration Quick Start

WAN Subsystem Configuration and Management Manual—522463-011

1-26

Displaying the Configured Configuration Track-ID

To display the configuration track-ID configured for your SWAN concentrator, use the

SCF INFO ADAPTER command, OSM Service Connection, or TSM Service

Application (G-series RVUs only). For more information about using OSM or TSM, see

the online help within each application. The SCF command syntax is:

conc_name

is the name of the SWAN concentrator (ADAPTER object).

If the configuration track-ID that is displayed by the SCF INFO ADAPTER command

does not match the configuration track-ID located on the rear panel of your SWAN

concentrator, you must use the SCF ALTER ADAPTER command to change the

configuration track-ID as follows:

Altering the Configured Configuration Track-ID

Before you alter the configuration track-ID, stop the SWAN concentrator and all of its

subordinate objects (SERVER, PATH, and TASK) by using the SCF STOP ADAPTER

command. The command syntax is:

Use the SCF ALTER ADAPTER command to alter the configuration track-ID. The

command syntax is:

The configuration track-ID is case sensitive. If you specify the value incorrectly, you will

not be able to use the SWAN concentrator.

Use the SCF START ADAPTER command to restart the SWAN concentrator and all of

its subordinate objects (SERVER, PATH, and TASK) after you have altered the

configuration track-ID. The command syntax is:

INFO ADAPTER $ZZWAN.#conc_name, TRACKID

STOP ADAPTER $ZZWAN.#conc_name, SUB ALL

ALTER ADAPTER $ZZWAN.#conc_name, TRACKID "config-track-id"

START ADAPTER $ZZWAN.#conc_name, SUB ALL