WAN Subsystem Configuration and Management Manual

Changing the Initial WAN Subsystem Configuration
WAN Subsystem Configuration and Management Manual—522463-011
3-8
Ethernet Port Reconfiguration Example
A PIF corresponds to a physical port and has the form:
adapter-name.sac-unit#.pif-unit-letter
For example, G11123.0.A identifies port A and G11123.0.B identifies port B and so
on.
2. Use the SLSA subsystem SCF INFO LIF command to determine the LIF name
configured for each port on each E4SA, FESA, GESA, or G4SA.
3. Use the TCP/IP subsystem SCF INFO ROUTE and INFO SUBNET commands to
identify and display the TCP/IP process associated with each LIF and associated
routers. LIF names are shown in the Devicename field. This example shows that
the TCP/IP process named $ZTC1 supports port B (LIF L11123B) on a G4SA.
Example 3-8. SLSA Subsystem SCF INFO LIF Command
2-> info lif $zzlan.*
SLSA Info LIF
Name PIF MAC Address Type
$ZZLAN.L018 E0153.0.A 08:00:8E:00:78:3A Ethernet
$ZZLAN.L019 E0153.0.B 00:00:8E:00:88:3D Ethernet
$ZZLAN.L01A E0153.1.A 08:00:8E:00:7E:3F Ethernet
$ZZLAN.L01B E0153.1.B 08:00:8E:00:79:E5 Ethernet
$ZZLAN.L11123A G11123.0.A 08:00:8E:00:5C:85 Ethernet