WAN Subsystem Configuration and Management Manual

Changing the Initial WAN Subsystem Configuration
WAN Subsystem Configuration and Management Manual—522463-011
3-11
IP Address Reconfiguration Example
case because the preferred and alternate TCP/IP processes are configured on
different SUBNETS.)
IP Address Reconfiguration Example
1. Shut down an X25AM subsystem communications line by using the STOP LINE
command.
2. Use the INFO PROCESS or the INFO SUBSYS, SUBNETLIST command to list
the names of the WANBoot processes. Use the STATUS PROCESS command to
find out if the process is running.
3. Stop the PATH object by using the STOP PATH command. Provide the applicable
CLIP and path information.
4. Stop the SERVER object by using the STOP SERVER command. Provide the
applicable CLIP information.
Example 3-11. Sample X25AM Subsystem STOP LINE Command
STOP LINE $X25P1
Example 3-12. Sample STOP PATH Command
STOP PATH $ZZWAN.#S01.1.A
Example 3-13. Sample STOP SERVER Command
STOP SERVER $ZZWAN.#S01.1