Web ViewPoint User Guide, Version 5.14

Web ViewPoint User Guide Version 5.14 - 528226-014 191
Port field corresponds to the port that SWAP (in HTTP mode) is listening to.
Secure Port field is ignored in this case. Yet it is necessary to ensure that the port specified is unused.
Add the following lines to WVPMENU file in the Web ViewPoint subvolume
[Function]
Caption JFT
FnID fnid_ZBaseJFT
ParentFnID fnid_ZBaseOprns
Group No
ObjectID OBJID_ZJFT
TagVariable ZWVP_VJFT
URLVariable ZWVP_UJFT
URLCookie ZWVP_OprnsJFT
LocalSystemURLSearchPref Variable
RemoteSystemURLSearchPref Variable
DefaultURL JFT.html
RemoteAllowed No
Make sure that the OBJECTID values in WVPCONF and WVPMENU match.
[Back to TOC]
6.6 PLUG-IN DEVELOPERS GUIDE
The plug-in developer guide is available in the Downloads ------> Documentation section at
www.hpWebViewPoint.com.
6.7 DSM/SCM SUPPORT
In order to configure Web ViewPoint to work with DSM/ SCM, the user will need to first use IPSETUP to copy the
Web ViewPoint Software from the CD to the Server.
Once the Software is present on the Server, you will need to use the DSMSCM Planner Interface to “Receive” the
Software into the Archive.
After this is done, you will need to proceed with normal DSM/ SCM operations to create a New Software Revision
and the use of the “Build/ Apply” command from within DSM/ SCM to manage the newly received software.
For a detailed explanation of how to use DSM/ SCM and receive new software in DSM/ SCM, you can refer to the
DSM/ SCM User’s Guide.
6.8 SOFTWARE LICENSE OPTIONS/RENEWALS
Web ViewPoint has two kinds of licenses:
Evaluation license for trial version
Customer license for standard version
EVALUATION LICENSE:
Once Web ViewPoint is activated, if there is an internet connection on the PC used to access WVP then the product
automatically fetches a temporary license (usually 60 days) from HP WebViewPoint.com. If there is no internet