Web ViewPoint User Guide, Version 5.14

Web ViewPoint User Guide Version 5.14 - 528226-014 45
Minimum value 100
Maximum value 500
Also, irrespective of single node or multi node, MAXEVENTS determine the maximum number of events
displayed on the events screen. (Note: In case of multimode, the parent node PARAM MAXEVENTS determine
the maximum number of events to be displayed)
 PARAM FDISTTIMEOUT<number of seconds> [WVPCONF]
This allows the user to specify the amount of time after which FDIST should timeout when it does not receive a
request from WEBVPT5.
Default value 300
Minimum value 120
Maximum value 9999
 PARAM CLIENTAUTH [YES|NO] [WVPCONF]
When set to YES, specifies that the applets making SSL connection require Client Authentication.
Default value NO
 PARAM CLIENTCERTPATH<location of client certificate> [WVPCONF]
This param is required when the CLIENTAUTH param is set to YES. Param specifies the path of the Client
Authentication Certificate to be used for the Client Authentication in SSL connection
 PARAM FTP-PORT<portnumber> [WVPCONF]
This param specifies the FTP port to be used by the WVP Text Editor and File transfer applet within CCM.
(Note: This PARAM has no effect on the Toolbar FTP applet.)
Default 21
 PARAM TELNET-PORT<portnumber> [WVPCONF]
Specifies the FTP port to be used by the WVP Terminal Emulator applet
Default 23
 PARAM SAFE-ACK-THRESHOLD <number> [WVPCONF]
This param specifies the number of Events that can be simultaneously acknowledged in the Events screens.
The threshold is a trade-off between the PC overhead (i.e. large number requires more resource) and the
number of events able to acknowledge simultaneously.
Default 25
 PARAM DISABLECHANGEPASSWORD [YES|NO] [WVPCONF]
This optional param is used to enable (Default) or disable the Change Password option that is present. If set to
YES, the option will not be displayed and when set to NO (Default) the change password option will be
displayed.
 PARAM SHOWCONSENT [YES/NO] [WVPCONF]
This param gives the user an option to use a consent banner at logon. When the param is set to YES the
consent banner will be shown in the logon screen and if set to NO, the consent banner will not be shown in
the logon screen. (Note: Consent Banner text can be customized see Assign Consent-Banner below.)
 ASSIGN CONSENT-BANNER , <filename> [WVPCONF]
This Assign defines the location of the text file that will be displayed in the consent banner section. This assign
should be placed in the base object section in the WVPCONF file.