X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem

X25AM Configuration and Management Manual—523424-004

4-28

Display for the INFO SU Command

The format of the display for the INFO SU command without the DETAIL option is:

Name

is the name of the SU object.

Protocol

shows the protocol the subdevice uses.

DevType

shows the device type and subtype for the SU. The device type depends on the

protocol. The subtype depends on the protocol and terminal.

Recsize

shows the maximum length of records the SU can receive or transmit. This value

must be in the range 1 through 4095.

Destaddr

specifies the network address of the remote device, which the subdevice uses as

the called address in outgoing call request packets.

X25AM Info SU

Name Protocol DevType Recsize Destaddr

$X25P1.#TERM ITI ( 6,0 ) 80

Table 4-5. Subdevice Types and Subtypes

Type Protocol Subtype Terminal

6 ITI 0 Conversational-mode terminal

1 6510 (ADM-2) terminal

2 6520 (ZENTEC) terminal

4 6530 terminal

9 PTP 0 Not applicable

58 QLLC 20 Not applicable

63 NAM 0 Not applicable