X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem

X25AM Configuration and Management Manual—523424-004

4-30

Considerations for the INFO Command

•

You can now display the entire Call User Data (CUD) field by using the SCF INFO

SU, DETAIL command.

•

X25AM does not support the SEL option, the DEFAULT option, or the

attribute-name option.

•

X25AM supports the SUB option only for the LINE object type.

NAMES Command

The NAMES command returns a list of the subordinate object types and names for the

specified object. This is a nonsensitive command.

Command Syntax for the NAMES Command

Syntax:

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

object-spec

designates the device names to be displayed. If you omit the object-spec, the

subordinate object names and types of the assumed object are displayed (for

information about the ASSUME command, see the SCF Reference Manual for G-

Series RVUs or SCF Reference Manual for H-Series RVUs).

SUB [ subtype ]

selects the subordinate objects that the NAMES command affects. subtype can

be a subordinate object type or one of the keywords ONLY or ALL.

If you name a subordinate object type, only objects of that type are affected. ONLY

specifies that only the subordinate objects are affected. ALL specifies that the

named object and the subordinate objects are affected. If you omit subtype, ALL

is assumed.

NAMES [ / OUT file-spec / ] [ object-spec ]

[ , SUB [ subtype ] ]