X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem

X25AM Configuration and Management Manual—523424-004

4-39

Display for the STATS LINE Command

I^NOP

shows the number of I-frames without the poll bit set that have been sent and

received.

shows the number of receive ready frames sent and received. Receive Ready

frames are used by the DTE/DCE to indicate it is ready to receive.

RNR

shows the number of receive not ready frames sent and received. Receive Not

Ready (RNR) frames are used by the DCE/DTE to indicate a busy condition.

REJ

shows the number of reject (REJ) frames sent and received.

SREJ

shows the number of reject frames (SREJ) sent and received. This frame is used

by the DTE or DCE to request retransmission of I-frames with the frame numbered

N(R).

SABM

shows the number of Set Asynchronous Balance Mode (SABM) frames sent and

received.

DISC

shows the number of disconnect (DISC) frames sent and received. DISC is used

by the DTE/DCE to indicate that the DTE/DCE is suspending operation.

FRMR

shows the number of Frame Reject frames (FRMR) sent and received.

shows the number of Unnumbered Acknowledgment (UA) frames sent and

received.

shows the number of Disconnect Mode (DM) frames sent and received.