X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
4-41
Display for the STATS SU Command
Frames
shows the total number of frames handled.
No Buffs
shows the total number of buffer-allocation errors.
Errors
shows the total number of received frames that contained errors.
Buffer Pool Information in Pages
The information in this field shows the memory pool statistics for all lines. This
information is related to the actual amount of memory space required by the X25AM
subsystem for buffers. This field contains the following information:
Size
shows the total size of the buffer.
In use
shows the number of pages of pool currently in use.
High Water
shows the maximum number of pages of pool used at any point.
Failures
shows the number of times the X25AM subsystem was forced to wait to secure
pool space.
Display for the STATS SU Command
The format of the display for the STATS SU command is:
Resettime
is the date and time that the last reset operation was performed.
X25AM STATS SU $X25P1.#TERM
Resettime 0:00:00.000 12/31/74 Sampletime 8:08:51.015 10/14/99
CircuitNum MsgSends 0 MsgReceives 0
Note. The STATS SU command displays the current count of messages sent and received for
a particular circuit. For SVC, stats is the count between establishment to clearing of the circuit.
Once the circuit is cleared, the statistics are reset. For PVC, the count is between the addition
and deletion of the SU.