X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem

X25AM Configuration and Management Manual—523424-004

4-43

Command Syntax for the STATUS Command

Syntax:

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

LINE line-name | SU su-name

designates the line or subdevice whose status information is to be displayed. If you

omit line-name or su-name, the status of the assumed object is displayed (for

information about the ASSUME command, see the SCF Reference Manual for G-

Series RVUs or SCF Reference Manual for H-Series RVUs).

DETAIL

if present, returns complete status information. If you omit DETAIL, you only a

single line of data for each object name.

SUB [ subtype ]

selects the subordinate objects that the command affects. subtype can be a

subordinate object type or one of the keywords ONLY or ALL.

If you name a subordinate object type, only objects of that type are affected. ONLY

specifies that only the subordinate objects are affected. ALL specifies that the

named object and the subordinate objects are affected. If you omit subtype, ALL

is assumed.

Display for the STATUS LINE Command

The display for the STATUS LINE command without the DETAIL option has the

following format:

Name

is the name of the line object.

STATUS [ / OUT file-spec / ] [ LINE line-name | SU su-name ]

[ , DETAIL ] [ , SUB [ subtype ] ]

X25AM STATUS LINE

Name State PPID BPID I/O ADDR T S Pa Track ID

$X25P1 STARTED ( 0,3 ) ( 1,4 ) ( 0,4,3,0) 61 63 A X017JJ