X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
4-44
Display for the STATUS LINE Command
State
is the current summary state of the line object.
PPID
is the CPU number and PIN of the primary X25AM I/O process.
BPID
is the CPU number and PIN of the backup X25AM I/O process.
I/O ADDR
is the primary I/O address, in the form (channel, physical address type, clip
number, line number). Channel is no longer used.
T
is the type. Only type 61 is allowed.
S
is the subtype. Only subtype 63 is allowed.
Pa
indicates the primary path to the CLIP.
Track ID
indicates the unique hardware identification of the SWAN concentrator (adapter).
The display for the STATUS LINE command with the DETAIL option has the following
format:
Alternate IP
indicates the alternate IP address used by the process.
BkpTrace
indicates whether the backup is being traced.
X25AM Detail Status Line $X25X
Preferred IP....... 192.168.005.084 Alternate IP...... 192.168.007.084
Track ID.... X017JJ CMG........ $ZZW00 I/O ADDR.. ( 0,4,3,0)
State....... STARTED PPIN....... ( 0,3 ) BPIN....... ( 1,4 )
LinkState...READY LDEV....... 156 NumSU...... 0
InUse....... NO Circuits... 510 Path....... A
DCD......... ON DSR........ ON CTS........ ON
CMG LDev.... 151 Type....... 61 Sub-Type... 63
PriTrace.... OFF BkpTrace... OFF