X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
4-45
Display for the STATUS LINE Command
BPIN
is the CPU and PIN of the backup X25AM I/O process.
Circuits
is the number of circuits on the line.
CMG
is the name of the Concentrator Manager process associated with the I/O process.
CMG Ldev
is the LDEV of the Concentrator Manager process.
CTS
shows whether the Clear To Send (CTS) signal is on or off.
DCD
indicates whether the Data Carrier Detect (DCD) signal is on or off.
DSR
shows whether the Data Set Ready (DSR) signal is on or off.
I/O Addr
is the primary I/O address, in the form (channel, physical address type, clip
number, line number). Channel is no longer used.
InUse
indicates if any line’s subdevice is opened.
LDEV
is the logical device number of the line.
LinkState
is the current state of the line (READY or NOT READY).
NumSU
is the number of SUs associated with this LINE object.
Path
indicates the primary path to the CLIP.