X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
4-47
Examples of the STATUS Command
Recsize
shows the maximum length of records received or transmitted by the SU. This
value is in the range 1 through 4095.
SUnum
is the number of the SU object.
LCNnum
is the number of the logical channel assigned to the SU if the SU is assigned to a
PVC; this field is blank if the SU is assigned to an SVC and the circuit is not yet
established.
Examples of the STATUS Command
The following command gives you the status of the line named $X25P1:
-> STATUS LINE $x25p1
The following command gives you the detailed status of the line named $X25P1:
-> STATUS LINE $x25p1,DETAIL
The following command gives you the status of the subdevice named $X25P1.#TERM:
-> STATUS SU $x25p1.#term
Considerations for the STATUS Command
•
X25AM does not support the SEL option.
•
X25AM supports the DETAIL option and the SUB option only for the LINE object
type.
Table 4-6. Subdevice Types and Subtypes
Type Protocol Subtype Terminal
6 ITI 0 Conversational-mode terminal
1 6510 (ADM-2) terminal
2 6520 (ZENTEC) terminal
4 6530 terminal
9 PTP 0 Not applicable
58 QLLC 20 Not applicable
63 NAM 0 Not applicable