X25AM Configuration and Management Manual

X25AM Configuration and Management Manual—523424-004
5-1
5 Attribute Descriptions
This section contains the following:
•
A description of each attribute used in the SCF commands to the X25AM
subsystem
•
A description of the Call User Data (CUD) feature, including an illustration
The attributes are listed in alphabetical order. The syntax for these attributes is given in
Command Syntax for the ADD Command on page 4-13, Attribute-Spec for the ALTER
SU Command on page 4-20, and Attribute-Spec for the ALTER LINE Command on
page 4-19.
ACCEPTCHG
specifies whether an incoming call requesting that the recipient pay the charges will be
accepted. The default value is Off. On means accept charges for incoming calls; Off
means do not accept charges for incoming calls.
ASSOCIATELINE
specifies the X.25 line that Expand and SNAX use. This line name appears in the
display for the INFO SU command only if the device type is NAM or 63,0. This attribute
cannot be set through SCF.
You can set ASSOCIATELINE using the EXPAND I/O process modifier,
ASSOCIATEDEV. This EXPAND modifier associates the logical device name of a NAM
process with an Expand-over-NAM line-handler process. The ASSOCIATEDEV
modifier declares the logical device name of the NAM process. For more information
about the ASSOCIATEDEV modifier, see the Expand Configuration and Management
Manual.
Default: Off
Range: On or Off
Objects: Subdevices
Default: None
Range: Name of line
Objects: Subdevices