X25AM Configuration and Management Manual

Attribute Descriptions
X25AM Configuration and Management Manual—523424-004
5-11
PAGE6520BLKSIZE
NULLFILL OFF: Conversation Mode = EOT PAD SOH “C” ETX
Page Mode = EOT PAD SOH “B” ETX
PAGE6520BLKSIZE
specifies the terminal block size, in bytes, used in the ITI protocol. This modifier
supports terminals that emulate the 6520 or 6530 terminal with a nonstandard block
size in block mode. The range of values is 256 through 8000. The default value is 256
bytes.
This is a terminal-dependent option; it can be found in the appropriate terminal
documentation. If a terminal has a configurable blocksize, the terminal blocksize
should be selected according to the specifications in the terminal documentation.
PARITY
specifies the parity of data characters transmitted to a terminal. The values can be
EVEN, ODD, or NONE. The default value is NONE (no parity is set).
The PARITY attribute has no meaning when using PTP mode. The parity attribute
applies only to conversational mode for ITI.
PARITYCHK
switches on or off parity checking. The default value is Off, which switches off parity
checking.
Default: Off
Range: On or Off
Objects: Subdevices
Default: 256
Range: 256 through 8000 bytes
Objects: Subdevices
Default: None
Range: EVEN, ODD, or NONE
Objects: Subdevices
Default: Off
Range: On or Off
Objects: Subdevices