X25AM Configuration and Management Manual

Attribute Descriptions

X25AM Configuration and Management Manual—523424-004

5-14

RECSIZE

specifies the maximum length of records that the SU receives or transmits. This value

must be in the range 1 through 4095. This is a required attribute for the ADD SU

command.

REMOTEADDREXT

is the address that the OSI network uses to identify the remote X25AM subsystem.

REMOTEADDREXT is a string of hexadecimal digits (0 through F) up to 40 digits long.

RESET means to delete any existing REMOTEADDREXT assignment.

REMOTEADDREXTTYPE

specifies whether the REMOTEADDREXT NSAP is full (0), reserved (1), non-OSI (2),

or reserved (3).

REMOTENET

specifies the addressing conventions to be used when building the called address in

the call request packet. The default value is the value of the line NETID. Possible

values for REMOTENET are listed below under Range.

Default: Not applicable

Range: 1 through 4095

Objects: Subdevices

Default: None

Range: String of hexadecimal digits (0 through F) up to 40 digits long

Objects: Subdevices

Default: 0

Range: 0 through 3

Objects: Subdevices

Default: X25XA

Range: DATANET, DATAPAC, DATEXP, DDN, DDXP, PSS, TELENET,

TRANSPAC, TWINET, TYMNET, UNINET, X25, X25NP, X25UD,

X25SA, X25XA

Objects: Subdevices