X25AM Configuration and Management Manual

Attribute Descriptions
X25AM Configuration and Management Manual—523424-004
5-17
T1TIMEOUT
T1TIMEOUT
is the time interval to wait for a frame-level response before retrying the frame-level
request. This value must be in the range 0 through 5:27:67 (5 minutes, 27 seconds,
and 67 hundredths of a second). The ITU-T equivalent parameter is T1.
THRESHOLD
specifies the number of frames that X25AM transmits and receives before checking the
line quality. The THRESHOLD attribute is equivalent to the X25AM I/O process
modifier, LINEQUALITYTHRESHOLD. For more information on how line quality is
determined, see Section 4, SCF Commands for the X25AM Subsystem.
THRUPUT
specifies the throughput class limit for calls received and the throughput class limit for
calls initiated. Each integer of the pair must be in the range 3 through 12. There are 16
throughput classes (numbered from 0 through 15). The default value is 4,4.
Default: 3 seconds
Range: 0 through 5:27:67
Objects: Lines
Default: 500
Range: 100 through 10000
Objects: Lines
Default: 4,4.
Range: Each integer of the pair must be in the range 3 through 12.
Objects: Subdevices.
Table 5-3. THRUPUT Values and Bits Per Second (page 1 of 2)
0 Reserved according to the ITU-T X.25 Recommendation
1 Reserved according to the ITU-T X.25 Recommendation
2 Reserved according to the ITU-T X.25 Recommendation
375
4150
5300
6600
71200
82400
94800