X25AM Configuration and Management Manual

PTrace for the X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
6-5
FILTER Command
clear packet expects a clear-confirmed packet in response, and a data packet expects
a receive-ready (RR) packet to be returned within the configured level-3 window size
value.
FRAME [ frame-type [ , frame-type ]...]
frame-type indicates the types of frames to be displayed. frame-type is one of
the following values:
[ I ]
[ NOTRR ]
[ REJ ]
[ RNR ]
[ RR ]
[ UNNUMBERED ]
NOTRR displays all frames but the RR frames. Omitting frame-type causes all
types to be displayed. All frame types are displayed by default.
HELP
displays the syntax of the X25AM filter options only after you have opened an
X25AM trace file.
LCN [ lcn-number ]
displays packets and level-3 state-machine entries for the specified logical channel
number (entered in decimal notation). LCN filtering has no effect on level-4 trace
records. Omitting lcn-number turns off filtering based on LCN. LCN is off by
default.
[NO]INTERNALS
indicates whether X25AM internals are to be displayed. INTERNALS displays
X25AM internals, which are used for debugging X25AM. NOINTERNALS
suppresses the display of internals. NOINTERNALS is the default specification.
[NO]SM
indicates whether state-machine entries are to be displayed. SM displays state-
machine entries for the selected levels. NOSM suppresses the display of state
machine entries. NOSM is the default specification.
FILTER [ FRAME [ frame-type ] [, frame-type ] ...] ]
[ HELP ]
[ LCN [ lcn-number ] ]
[ [NO]INTERNALS ]
[ [NO]SM ]
[ PACKET [ packet-type ], [ packet-type] ]
[ RESET ]
[ SDN [ subdevice-number ] ]