X25AM Configuration and Management Manual

What’s New in This Manual

X25AM Configuration and Management Manual—523424-004

xiv

New and Changed Information

•

Updated Section 2, Overview of the X25AM Subsystem for NonStop NS-series

changes.

•

Updated the following Sections or Appendices for NonStop NS-series changes,

H-series terminology or new manual titles, Gigabit Ethernet 4-port ServerNet

adapter (G4SA), or SWAN 2 concentrator changes:

Section 3

Configuring an X25AM Subsystem on page 3-1

WAN Subsystem Interface to the X25AM Subsystem on page 3-2

Task 1: Review Configuration Prerequisites on page 3-3

Task 3: Add the X25AM Profile on page 3-5

Task 4: Determine the SWAN Configuration Information on page 3-6

Task 5: Add an X25AM I/O Process on page 3-7

PROGRAM on page 3-14

PROGRAM download-filename on page 3-30

Section 4

SCF Commands for the X25AM Subsystem on page 4-1

Subsystem Control Facility on page 4-1

Subsystem Control Point (SCP) on page 4-2

SCF Commands on page 4-2

Running SCF on page 4-3

Input Sources and Output Destinations on page 4-3

General Command Format on page 4-4

Object-Type Hierarchy on page 4-6

Commands Supported by the X25AM Subsystem on page 4-10

Command Syntax for the ABORT Command on page 4-12

Command Syntax for the ADD Command on page 4-13

Command Syntax for the ALLOWOPENS Command on page 4-16

Command Syntax for the DELETE Command on page 4-24

Note. Command syntax changes are only related to introducing a new manual (SCF

Reference Manual for H-Series RVUs).