X25AM Configuration and Management Manual

X25AM Error Messages
X25AM Configuration and Management Manual—523424-004
C-4
00512
00512
Cause. The named object is not supported by the X25AM subsystem.
Effect. Command is not executed.
Recovery. Choose a valid object name, and reissue the command.
00513
Cause. The combination of values of the named attributes is inconsistent.
Effect. Command is not executed.
Recovery. Check for the proper values, and reissue the command.
00516
Cause. The DISCONNECT command is not supported when the circuit is a PVC.
Effect. Command is not executed.
Recovery. Use the DISCONNECT command only with an SVC.
00517
Cause. EXTFORMAT cannot be altered by using the SCF ALTER LINE command if
PACKETSIZE is less than 256.
Effect. Command is not executed.
Recovery. Issue the SCF ALTER LINE command with EXTFORMAT ON or OFF only
if PACKETSIZE is greater than or equal to 256.
X25AM E00512 Object name object-name is not supported
X25AM E00513 The values of attribute-name and attribute-name
are inconsistent
X25AM E00516 Disconnect not completed; circuit is PVC
X25AM E00517 EXTFORMAT is not allowed because packetsize is
less than 256