X25AM Configuration and Management Manual

X25AM Configuration and Management Manual—523424-004
xvii
About This Manual
The X25AM Configuration and Management Manual describes how to configure and
manage the X25AM subsystem and includes:
•
A configuration quick start that provides the basic information required to quickly
and easily define and start an X25AM subsystem.
•
An explanation of the major features and capabilities of the X25AM subsystem.
•
An explanation of how to configure the X25AM subsystem using the Subsystem
Control Facility (SCF) interactive interface to the WAN subsystem.
•
A description of the SCF interactive interface to the X25AM subsystem, including
detailed reference information for each of the SCF commands to the X25AM
subsystem.
Who Should Use This Manual
This manual is intended primarily for system managers responsible for installing and
managing X25AM. It may also be used for reference by application programmers using
X25AM lines for data communications.
It is assumed that you are familiar with the G-series and H-series system-configuration
process and have access to the WAN Subsystem Configuration and Management
Manual and installation documentation.
What’s in This Manual
Table i. Summary of Contents (page 1 of 2)
Section Title This section . . .
1 Configuration Quick Start
Provides the basic information required to
enable you to quickly define and start the
X25AM subsystem.
2 Overview of the X25AM
Subsystem
Provides an overview of X25AM subsystem.
3 Configuring an X25AM Subsystem
Describes the X25AM configuration and the
I/O process modifiers.
4 SCF Commands for the X25AM
Subsystem
Describes the SCF commands to the X25AM
subsystem, sensitive and nonsensitive
commands, and detailed information about
each SCF command.
5 Attribute Descriptions
Describes the SCF line and subdevice
attributes for the X25AM subsystem.
6 PTrace for the X25AM Subsystem
Describes the X25AM Ptrace utility.