X25AM Configuration and Management Manual

Using the NETID Modifier

X25AM Configuration and Management Manual—523424-004

D-3

Detail-Set Specifications

Table D-1 on page D-3 through Table D-16 on page D-8 provide a description of

special port numbers, default PAD parameter values, and network-dependent facility

requirements for each set.

Table D-1. X25 Detail-Set Specification

Call Addressing: SU PORT NUMBER is 0 to 99 digits; leading zeros are included.

Incoming Call: Called address is LINE SRCADDR + SU PORT NUMBER.

A 0- to 2-digit port number is expected.

Call Request: Called address is SU DESTADDR.

Calling address is LINE SRCADDR + SU PORT NUMBER.

PAD Profile: Standard default.

Linefeed Echo: X25AM I/O process performs.

Editing: X25AM I/O process performs.

Table D-2. X25NP (No Ports)

Call Addressing: Configured SU PORT NUMBER should always be 0.

Incoming Call: All calls go to port number 0.

Call Request: Called address is SU DESTADDR.

Calling address is LINE SRCADDR.

PAD Profile: Standard default.

Linefeed Echo: X25AM I/O process performs.

Editing: X25AM I/O process performs.

Table D-3. X25SA (Subaddress)

Call Addressing: SU PORT NUMBER is 0 to 4 digits, from 0 to 9999.

Leading zeros are deleted.

Incoming Call: Called address is SU PORT NUMBER.

A 0- to 4-digit port number is expected.

Call Request: Called address is SU DESTADDR.

Calling address is LINE SRCADDR + SU PORT NUMBER.

PAD Profile: Standard default.

Linefeed Echo: X25AM I/O process performs.

Editing: X25AM I/O process performs.