X25AM Configuration and Management Manual

Using the NETID Modifier
X25AM Configuration and Management Manual—523424-004
D-4
Detail-Set Specifications
Table D-4. X25UD (User Data)
Call Addressing: SU PORT NUMBER is 0 to 99.
Incoming Call: Called address is not used by X25AM.
The port number is the fifth byte of call user data (%H41 = port
1,%H42 = port 2, and so on).
Call Request: Called address is SU DESTADDR minus its last two digits. The last
two digits plus%H40 are placed in the fifth byte of the call user data
field (01 =%H41, 02 =%H42, and so on).
Calling address is LINE SRCADDR.
PAD Profile: Standard default.
Linefeed Echo: X25AM I/O process performs.
Editing: X25AM I/O process performs.
Table D-5. X25XA (Extended Address)
Call Addressing: SU PORT NUMBER is 0 to 4 digits, from 0 to 9999.
Leading zeros are deleted.
Incoming Call: Called address is LINE SRCADDR + SU PORT NUMBER.
A 0- to 4-digit port number is expected.
Call Request: Called address is SU DESTADDR.
Calling address is LINE SRCADDR + SU PORT NUMBER.
PAD Profile: Standard default.
Linefeed Echo: X25AM I/O process performs.
Editing: X25AM I/O process performs.
Table D-6. DATANET (Like X25XA)
Call Addressing: SU PORT NUMBER is 0 to 4 digits, from 0 to 9999.
Leading zeros are deleted.
Incoming Call: Called address is LINE SRCADDR + SU PORT NUMBER.
A 0- to 4-digit port number is expected.
Call Request: Called address is SU DESTADDR.
Calling address is LINE SRCADDR + SU PORT NUMBER.
PAD Profile: Standard default.
Linefeed Echo: X25AM I/O process performs.
Editing: X25AM I/O process performs.