X25AM Configuration and Management Manual

Using the NETID Modifier
X25AM Configuration and Management Manual—523424-004
D-6
Detail-Set Specifications
Table D-10. DDXP (Like X25UD)
Call Addressing: SU PORT NUMBER is from 0 to 99.
Incoming Call: Called address is LINE SRCADDR + SU PORT NUMBER. The port
number is the fifth byte of call user data. The default is 0.
Call Request: Called address is SU DESTADDR minus its last digits. The last two
digits plus %H40 are placed in the fifth byte of the call user data field
(01 = %H41, 02 = %H42, and so on).
Calling address is LINE SRCADDR.
PAD Profile: Standard default.
Linefeed Echo: Performed by PAD.
Editing: X25AM I/O process performs.
Table D-11. PSS (Like X.25)
Call Addressing: SU PORT NUMBER is 0 to 2 digits.
Incoming Call: Called address is LINE SRCADDR + SU PORT NUMBER.
A 0- to 2-digit port number is expected.
Call Request: Called address is SU DESTADDR.
Calling address is LINE SRCADDR + SU PORT NUMBER.
PAD Profile: Standard default.
Linefeed Echo: Performed by PAD.
Editing: X25AM I/O process performs.
Other: Call accept.
Table D-12. TELENET (Like X.25)
Call Addressing: SU PORT NUMBER is 0 to 2 digits.
Incoming Call: Called address is LINE SRCADDR + SU PORT NUMBER.
A 0- to 2-digit port number expected.
Call Request: Called address is SU DESTADDR.
Calling address is LINE SRCADDR + SU PORT NUMBER.
PAD Profile: Standard default.
Linefeed Echo: Performed by PAD.
Editing: X25AM I/O process performs.
Parameters: Special and national.
Other: Special code for TELENET 1976 national facilities for packet size and
window negotiation. Use only for 1976 TELENET service. Use X25
for 1980 TELENET service.