X25AM Configuration and Management Manual

Using the NETID Modifier
X25AM Configuration and Management Manual—523424-004
D-7
Detail-Set Specifications
Table D-13. TRANSPAC (Like X25SA)
Call Addressing: SU PORT NUMBER is 0 to 4 digits. Leading zeros are deleted.
Incoming Call: Called address is LINE SRCADDR + SU PORT NUMBER.
A 0- to 4-digit PORT NUMBER is expected.
Call Request: Called address is SU DESTADDR.
Calling address is LINE SRCADDR + SU PORT NUMBER.
PAD Profile: Standard default.
Clearing: Uses Invitation To Clear.
Linefeed Echo: X25AM I/O process performs.
Editing: X25AM I/O process performs.
Other: Allows LCN 0 for first PVC or first SVC LCN.
Table D-14. TWINET (Like X25NP)
Call Addressing: Configured SU PORT NUMBER should always be 0.
PAD Profile: All calls go to port number 0.
Linefeed Echo: Called address is SU DESTADDR.
Calling address is LINE SRCADDR.
Editing: Standard default.
Parameters: X25AM I/O process performs.
Other: X25AM I/O process performs.
Table D-15. TYMNET (Like X.25)
Call Addressing: SU PORT NUMBER is 0 to 2 digits.
Incoming Call: Called address is LINE SRCADDR + SU PORT NUMBER.
A 0- to 2-digit port number is expected.
Call Request: Called address is SU DESTADDR.
Calling address is LINE SRCADDR + SU PORT NUMBER.
PAD Profile: Standard default.
Linefeed Echo: Performed by PAD.
Editing: X25AM I/O process performs.