X25AM Configuration and Management Manual

Using the NETID Modifier
X25AM Configuration and Management Manual—523424-004
D-17
TELENET PAD Profiles
TELENET PAD Profiles
Table D-26, Table D-27, and Table D-28 on page D-18 provide descriptions of the
TELENET PAD profiles.
Conversational Mode
6510 Terminal in Block Mode
Table D-26. TELENET PAD Profiles for Conversational Mode
X.3 Parameter
Internal Parameter
Code,Value
Actual Parameter
Code,Value
Escape to command mode 1,1 1,1
Echo 2,0 2,0 or 1 (*)
Selection of data forwarding conditions 3,126 3,2 or 126 (*)
Idle timer 4,0 4,0
Break handling 7,21 7,0 or 21 (*)
Discard output 8,0 8,0
Line folding 10,0 10,0
PAD parameter separator 0,33 0,33 (***)
Line feed insertion after receipt of carriage
return from terminal
1,0 1,0 or 4 (*)
Table D-27. TELENET PAD Profiles for 6510 Terminal in Block Mode
X.3 Parameter
Internal Parameter
Code,Value
Actual Parameter
Code,Value
Escape to command mode 1,1 1,1
Echo 2,0 2,0
Selection of data forwarding conditions 3,126 3,2 or 126 (*)
Idle timer 4,0 4,0
Break handling 7,21 7,0 or 21 (*)
Discard output 8,0 8,0
Line folding 10,0 10,0
PAD parameter separator 0,33 0,33 (***)
Line feed insertion after receipt of carriage
return from terminal
1,0 1,0 or 4 (*)