X25AM Configuration and Management Manual

Using the NETID Modifier
X25AM Configuration and Management Manual—523424-004
D-20
TWINET PAD Profiles
6520/6530 Terminal in Block Mode
TWINET PAD Profiles
Same as the Standard PAD Profiles on page D-8.
TYMNET PAD Profiles
Same as the Standard PAD Profiles on page D-8.
UNINET PAD Profiles
Same as the Standard PAD Profiles on page D-8.
Table D-31. TRANSPAC PAD Profiles for 6520/6530 Terminal Block Mode
X.3 Parameter
Internal Parameter
Code,Value
Actual Parameter
Code,Value
Escape to command mode 1,0 1,0
Echo 2,0 2,0
Selection of data forwarding conditions 3,0 3,0
Idle timer 4,2 4,2
Ancillary device control 5,0 5,0
Suppression of network messages 6,0 6,0
Break handling 7,21 7,0 or 21 (*)
Discard output 8,0 8,0
Padding after receipt of carriage return from
terminal
9,0 9,0
Line folding 10,0 10,0
Flow control of PAD by terminal 12,0 12,0
Line feed insertion after receipt of carriage
return from terminal
13,0 13,0