X25AM Configuration and Management Manual

Moving to G-Series or H-Series RVUs
X25AM Configuration and Management Manual—523424-004
E-2
SYSGEN-to-SCF Considerations
SYSGEN-to-SCF Considerations
This subsection explains how information that is configured in SYSGEN CONFTEXT
paragraphs on systems running D-series RVUs is defined on systems running G-series
RVUs.
CONFTEXT Paragraph Information
Table E-1 lists the CONFTEXT paragraphs that are relevant to X25AM configuration
and how the information in each paragraph is defined on systems running G-series
RVUs.
The DEFINES Paragraph
The DEFINES paragraph allows you to customize a profile to be used later when
configuring a DEVICE object type. You can summarize X25AM line modifiers that you
may wish to use repeatedly.
For more information about WAN subsystem configuration, see the WAN Subsystem
Configuration and Management Manual. For more information about Kernel subsystem
configuration, see the SCF Reference Manual for the Kernel Subsystem.
Profile for G-Series X25AM Subsystem
For systems running D-series RVUs, default values for line types are contained in
SYSGEN macros. For systems running G-series RVUs, profiles are used in a similar
way. However, for the X25AM subsystem, the only profile supported for use with
systems running G-series RVUs is called PX250061.
For more information about creating profiles, see Section 3,
Configuring an X25AM Subsystem and the WAN Subsystem Configuration and
Management Manual.
Table E-1. Defining CONFTEXT Paragraph Information on G-Series Systems
CONFTEXT Paragraph G-Series Definition
CONTROLLERS SWAN concentrator is configured through the WAN
subsystem.
DEFINES Customizes a profile to be used later when configuring
DEVICE object type.
PATHS This information is not applicable for systems running G-
series RVUs.
PERIPHERALS I/O processes are configured with SCF commands to the
WAN subsystem.
ALLPROCESSORS Still exists in G-series CONFTEXT file.