X25AM Configuration and Management Manual

Moving to G-Series or H-Series RVUs

X25AM Configuration and Management Manual—523424-004

E-3

COUP-to-SCF Considerations

The COUP interface is no longer supported for G-series RVUs; the COUP functions

are replaced by SCF. Although most COUP commands have a direct SCF equivalent,

the method of configuration on systems running G-series RVUs is very different from

systems running D-series RVUs.

The following COUP commands have no SCF equivalent and cannot be used with

G-series systems:

CONFIG

INFO CONTROLLER

INFO MF_CONTROLLERS

INFO PATH

RESET

SHOW

TIME

For the X25AM subsystem, only the DEVICE object type has an equivalent SCF

DEVICE object type.

Managing an X25AM Network

For systems running G-series RVUs, the Subsystem Control Facility (SCF) for the

WAN subsystem replaces both PUP and DSC.

For NonStop S-series systems, Compaq TSM replaced the system maintenance

functions provided by the Syshealth toolkit, HP Tandem Maintenance and Diagnostic

Subsystem (TMDS), and the Remote Maintenance Interface (RMI) product. For more

information about TSM, see the TSM Online User Guide.

For G06.21, the HP Open System Management (OSM) product replaces TSM as the

system management tool of choice for NonStop S-series systems. OSM offers a

browser-based interface that improves scalability and performance and overcomes

other limitations that exist in TSM. TSM is still supported, but OSM is required to

support new functionality in G06.21 and later.

For more information about OSM, see the OSM Migration Guide and the OSM User’s

Guide.