X25AM Configuration and Management Manual

Diagnostic and Cause Codes
X25AM Configuration and Management Manual—523424-004
F-4
ITU-T Recommended Diagnostic Codes
Table F-6. Call Setup, Call Clearing, or Registration Problems
Hexadecimal Decimal Description
40 64 Call setup, call clearing, or registration problem
41 65 Facility/registration code not allowed
42 66 Facility parameter not allowed
43 67 Invalid called DTE address
44 68 Invalid calling DTE address
45 69 Invalid facility/registration length
46 70 Incoming call barred
47 71 No logical channel available
48 72 Call collision
49 73 Duplicate facility requested
4A 74 Non-zero address length
4B 75 Non-zero facility length
4C 76 Facility no provided when expected
4D 77 Invalid ITU-T-specified DTE facility
4E 78 Maximum number of call redirections or call deflections
exceeded
Table F-7. Miscellaneous Diagnostic Codes
Hexadecimal Decimal Description*
50 80 Miscellaneous
51 81 Improper cause code from DTE
52 82 Nonoctet aligned
53 83 Inconsistent Q bit setting
54 84 NUI problem
* The meanings of these diagnostic codes are different if you are using a SNAX-over-X.25 (SOX) configuration.
Refer to Table F-9
on page F-5