X25AM Configuration and Management Manual

X25AM Configuration and Management Manual—523424-004

G-1

Configuration Files for the X25AM

Subsystem

You can use SCF interactively by entering individual commands at a terminal. You can

also use SCF programmatically to create commonly used sequences of commands

(Obey files).

Before adding the X25AM profile object, all the components of the ServerNet wide area

network (SWAN) concentrator and the WAN subsystem must be running.

If you need more information on configuring and managing the WAN subsystem, see

the WAN Subsystem Configuration and Management Manual.

Adding an X25AM Profile

With SCF for the systems running G-series or H-series RVUs, the X25AM profile object

replaces the function of the system generation (SYSGEN) program. The following SCF

command file adds the default X25AM profile without modification:

The following SCF command file adds the X25AM profile but modifies the default for

circuits from 32 to 510:

ADD PROFILE $ZZWAN.#PX250061, FILE $SYSTEM.SYS00.PX250061

ADD PROFILE $ZZWAN.#px25c510, FILE $SYSTEM.SYS00.PX250061, &

CIRCUITS 510