X25AM Configuration and Management Manual

Configuration Quick Start
X25AM Configuration and Management Manual—523424-004
1-3
Log On to the NonStop Server and Obtain
SWAN/SWAN 2 Information
b. Record the CLIP containing an available WAN line in the clip-num field in
Table 1-1.
c. Record an available WAN line number in the line-num field in Table 1-1.
d. Record the path you prefer to use in the path-name field in Table 1-1. You
can only use a path that has been configured.
5. Determine the processors in which the SWAN/SWAN 2 concentrator is configured.
a. Issue the INFO ADAPTER command. The INFO ADAPTER command lists the
name of the two TCP/IP processes in which the SWAN/SWAN 2 concentrator
is configured. For example:
-> INFO ADAPTER $ZZWAN.#s01
b. Issue the STATUS PROCESS command for each TCP/IP process (in
boldface) to determine the primary CPU each process is running in. For
example:
-> STATUS PROCESS $xpba
Note. PATH is optional; if not specified, PATH A is the default.
WAN MANAGER Detailed Info Adapter \TOYS2.$ZZWAN.#S01
*TrackId.......... X017JJ *TCPIP Name.......$ZBPA
*ALTTCPIP Name.... $ZBPB Concentrator Type. SYNC
KERNELCODE........ \TOYS2.$SYSTEM.CSS00.C7953P00
*SNMPCODE......... \TOYS2.$SYSTEM.CSS00.C7849P00
*HOSTIP Address... 192.168.005.081
*ALTHOSTIP Address 192.168.007.081
SUBNETMASK........ %HFFFFFF00
ALTSUBNETMASK..... %HFFFFFF00
TCPIP Status PROCESS \TOYS2.$ZBPA
Status: STARTED
PPID............ ( 0,106) BPID................... ( 1,132)
Proto State Laddr Lport Faddr Fport SendQ RecvQ
TCP LISTEN 0.0.0.0 9000 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 telnet 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 ftp 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 finger 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 echo 0.0.0.0 * 0 0
UDP 0.0.0.0 1025 0.0.0.0 * 0 0
UDP 0.0.0.0 68 0.0.0.0 * 0 0
UDP 0.0.0.0 67 0.0.0.0 * 0 0
UDP 0.0.0.0 69 0.0.0.0 * 0 0