X25AM Configuration and Management Manual

Configuration Quick Start
X25AM Configuration and Management Manual—523424-004
1-4
Add the X25AM Profile
-> STATUS PROCESS $zbpb
c. Record the PPID for the TCPIP Name and ALTTCPIP Name fields in the
STATUS PROCESS display (in boldface) in the cpu and altcpu fields in
Table 1-1, Worksheet for Adding an X25AM I/O Process, on page 1-5.
Repeat Steps 3 through 5 for each X25AM I/O process you need to configure.
Add the X25AM Profile
A profile defines modifiers, default values, and ranges of values for the X25AM
subsystem. The X25AM subsystem supports only one profile named PX250061. This
type 832 file is located in the sysnn subvolume. The file is part of the X25AM product.
The file contains all the attributes for X25AM I/O processes and provides the function
of SYSGEN macros for the NonStop NS-series or NonStop S-series server.
If you have already added this profile, you can skip this task.
1. Issue the following SCF command to see the profiles that have been added:
-> NAMES PROFILE $ZZWAN.*
The output of the NAMES command lists the profiles that have been added. If the
X25AM profile does not exist, you need to add it.
2. The program file must use the current sysnn. To obtain the current sysnn, type
the following:
-> STATUS *, USER
3. Add the X25AM profile using the following SCF command:
-> ADD PROFILE $ZZWAN.#PX250061, FILE $SYSTEM.SYSnn.PX250061
For more information about adding and modifying an X25AM profile, see Task 3: Add
the X25AM Profile on page 3-5.
TCPIP Status PROCESS \TOYS2.$ZBPB
Status: STARTED
PPID............ ( 1,134) BPID................... ( 0,109)
Proto State Laddr Lport Faddr Fport SendQ RecvQ
TCP LISTEN 0.0.0.0 9000 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 telnet 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 ftp 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 finger 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 echo 0.0.0.0 * 0 0
UDP 0.0.0.0 1025 0.0.0.0 * 0 0
UDP 0.0.0.0 68 0.0.0.0 * 0 0
UDP 0.0.0.0 67 0.0.0.0 * 0 0
UDP 0.0.0.0 69 0.0.0.0 * 0 0