X25AM Configuration and Management Manual

Configuration Quick Start

X25AM Configuration and Management Manual—523424-004

1-5

Add the X25AM I/O Processes

Before adding any X25AM I/O processes, verify that all WAN processes, profiles, and

a SWAN/SWAN 2 concentrator are added and started.

During the Log On to the NonStop Server and Obtain SWAN/SWAN 2 Information task

(see Steps 3 through 5 of this task) you added the necessary information for executing

the ADD DEVICE command to Table 1-1. Execute the ADD DEVICE command using

the information in Table 1-1.

Example 1-1 shows the syntax used to create the X25AM I/O process named $X25P1.

Table 1-1. Worksheet for Adding an X25AM I/O Process

-> ADD DEVICE $ZZWAN.#__________, PROFILE PX250061, &

-> IOPOBJECT $SYSTEM.SYS00.X25OBJ, &

-> PROGRAM $SYSTEM.CSS00.C1096P00, &

-> TYPE (61,63), &

-> RECSIZE 32767, &

-> ADAPTER __________, & (See Step 4a)

-> CLIP _____________, & (See Step 4b)

-> LINE _____________, & (See Step 4c)

-> PATH _____________, & (See Step 4d)

-> CPU ______________, & (See Step 5c)

-> ALTCPU ____________ & (See Step 5c)

For a SWAN concentrator (T3880) replace C1096P00 with C0051P00 if you are implementing an X.21 interface

with an X.21 converter cable. For a SWAN 2 concentrator, replace C1096P00 with C0051Q00.