X25AM Configuration and Management Manual

Contents
X25AM Configuration and Management Manual—523424-004
ii
3. Configuring an X25AM Subsystem (continued)
3. Configuring an X25AM Subsystem (continued)
Configuration Tasks 3-3
Task 1: Review Configuration Prerequisites 3-3
Task 2: Familiarize Yourself with Subsystems, Commands, and Attributes 3-4
Task 3: Add the X25AM Profile 3-5
Task 4: Determine the SWAN Configuration Information 3-6
Task 5: Add an X25AM I/O Process 3-7
Task 6: Start an X25AM I/O Process 3-8
Task 7: Start an X25AM Line 3-9
Task 8: Add X25AM Subdevices 3-10
Altering an X25AM I/O Process 3-11
List of X25AM I/O Process Modifiers 3-12
X25AM Modifier Dictionary 3-15
Numeric Range Validation 3-15
4. SCF Commands for the X25AM Subsystem
Subsystem Control Facility 4-1
Subsystem Control Point (SCP) 4-2
SCF Commands 4-2
How SCF Works 4-3
Running SCF 4-3
Input Sources and Output Destinations 4-3
General Command Format 4-4
SCF Online Help 4-4
Version Compatibility 4-4
SCF Interface to the X25AM Subsystem 4-5
X25AM Subsystem Objects 4-6
Object Types and Object Names 4-6
Object States 4-8
Object Attributes 4-9
Frequently Performed Tasks on X25AM Objects 4-9
Commands Supported by the X25AM Subsystem 4-10
Sensitive and Nonsensitive Commands 4-11
ABORT Command 4-12
Command Syntax for the ABORT Command 4-12
Examples of the ABORT Command 4-12
Considerations for the ABORT Command 4-13