X25AM Configuration and Management Manual

Configuring an X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
3-12
List of X25AM I/O Process Modifiers
List of X25AM I/O Process Modifiers
The current X25AM I/O process modifiers are listed in Table 3-1 on page 3-12 in
alphabetical order.
Where there is a choice of modifiers, they are listed by the default modifier. Default
values are shown where applicable.
Figure 3-5. Making Persistent Changes to an X25AM I/O Process
Note. Some X25AM modifiers that are listed are not supported but appear in the X25AM
profile object. These modifiers are listed but are not described.
Table 3-1. List of X25AM Modifiers and Defaults (page 1 of 4)
Modifier Name
(Default Listed First) Default Setting Notes
ASCII or EBCDIC Not in effect
AUTOLOAD or
NOAUTOLOAD
AUTOLOAD
CALLUSERDATA or
NOCALLUSERDATA
CALLUSERDATA Determines value for CUD
field in Call Request
packet.
CIRCUITS 32 Maximum is 510.
CLBDOWNLOADENTRIES Not in effect
CLBSTATUSPROBETIME Not in effect
CLBTIMER Not in effect
-- Not applicable.
VST0305.vsd
WAN
Subsystem
$ZZWAN
Terminal
ALTER
DEVICE
$ZZWAN.X25P1
Management
Information
Base (MIB)
Object
($ZZWAN.#X25P1)