X25AM Configuration and Management Manual

Configuring an X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
3-17
Numeric Range Validation
CLBDOWNLOADENTRIES
CLBDOWNLOADENTRIES has no effect on the X25AM line handler process.
CLBSTATUSPROBETIME
CLBSTATUSPROBETIME has no effect on the X25AM line handler process.
CLBTIMER
CLBTIMER has no effect on the X25AM line handler process.
CLBWINDOWEXT
CLBWINDOWEXT has no effect on the X25AM line handler process.
CLOCKnnnn
You can use the SCF line attribute CLOCKSPEED to alter the clock speed.
DCE. See DTE
DCECLOCK
DCECLOCK disables the communications line interface processor (CLIP) clock.
DTECLOCK enables the CLIP clock. Use DTECLOCK if your system uses cabling
instead of a modem eliminator.
You can use the SCF line attribute CLOCKMODE to alter DTECLOCK and
DCECLOCK.
Note: Not in effect (CLBDOWNLOADENTRIES is not supported)
Note: Not in effect (CLBSTATUSPROBETIME is not supported)
Note: Not in effect (CLBTIMER is not supported)
Note: Not in effect (CLBWINDOWEXT is not supported)
Default: 600 (no leading 0)
Units: Baud
Range: 600, 1200, 2400, 4800, 9600, 19200, 38400, 56000, 115200
Default: DCECLOCK
Units: Not applicable
Alternate Modifier: DTECLOCK