X25AM Configuration and Management Manual

Contents
X25AM Configuration and Management Manual—523424-004
iv
4. SCF Commands for the X25AM
Subsystem (continued)
4. SCF Commands for the X25AM Subsystem (continued)
START Command 4-33
Command Syntax for the START Command 4-33
Examples of the START Command 4-34
Considerations for the START Command 4-34
STATS Command 4-35
Command Syntax for the STATS Command 4-35
Display for the STATS LINE Command 4-36
Display for the STATS SU Command 4-41
Examples of the STATS Command 4-42
Considerations for the STATS Command 4-42
STATUS Command 4-42
Command Syntax for the STATUS Command 4-43
Display for the STATUS LINE Command 4-43
Display for the STATUS SU Command 4-46
Examples of the STATUS Command 4-47
Considerations for the STATUS Command 4-47
STOP Command 4-48
Command Syntax for the STOP Command 4-48
Examples of the STOP Command 4-48
Considerations for the STOP Command 4-48
STOPOPENS Command 4-49
Command Syntax for the STOPOPENS Command 4-49
Examples of the STOPOPENS Command 4-49
Considerations for the STOPOPENS Command 4-50
SWITCH Command 4-50
Command Syntax for the SWITCH Command 4-50
Examples of the SWITCH Command 4-51
Considerations for the SWITCH Command 4-51
TRACE Command 4-51
Command Syntax for the TRACE Command 4-51
Examples of the TRACE Command 4-54
How to Use the TRACE Command to Troubleshoot X25AM Problems 4-54
VERSION Command 4-55
Command Syntax for the VERSION Command 4-55
Examples of the VERSION Command 4-56