X25AM Configuration and Management Manual

Configuring an X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
3-25
Numeric Range Validation
L2WINDOW n
L2WINDOW is the number of information (I) frames that can be sent before the first
one is acknowledged.
L2WINDOW is the network subscription parameter K.
L3MOD128. See L3MOD8
L3MOD8
L3MOD8 or L3MOD128 determines the packet-numbering sequence.
•
L3MOD8: Specifies modulo 8. The packet-numbering sequence is 0 through 7 (and
then start at 0).
•
L3MOD128: Specifies modulo 128. The packet-numbering sequence is 0 through
127 (and then start at 0).
L3MOD8 and L3MOD128 are network subscription parameters.
The value can be altered with the SCF line attributes L3MOD8 or L3MOD128.
L3RECVTHRUPUT n
L3RECVTHRUPUT specifies the receiving throughput class for the line. The default
value is 4 (150 bps). There are 16 throughput classes (numbered from 0 through 15).
The value depends on the network.
Table 3-2 on page 3-26 lists the throughput classes and associated bits per second.
Default: 4
Units: Integers
Range: 1 through 7
Default: L3MOD8
Units: Not applicable
Alternate Modifier: L3MOD128
Default: 4
Units: Integers
Range: 3 through 12