X25AM Configuration and Management Manual

Configuring an X25AM Subsystem
X25AM Configuration and Management Manual—523424-004
3-26
Numeric Range Validation
L3SENDTHRUPUT n
L3SENDTHRUPUT specifies the sending throughput class for the line. The default
value is 4 (150 bps). There are 16 throughput classes (numbered from 0 through 15).
The value depends on the network.
L3WINDOW n
L3WINDOW specifies the default packet window size. The window size is the number
of data packets that can be sent before an acknowledgment is received. Window size
is a network-subscription parameter.
The value can be altered with the SCF line attribute L3WINDOW.
Default: 4
Units: Integers
Range: 3 through 12
Table 3-2. Throughput Classes and Bits Per Second
Throughput
Class Bits Per Second (bps)
0 Reserved according to the ITU-T X.25 Recommendation
1 Reserved according to the ITU-T X.25 Recommendation
2 Reserved according to the ITU-T X.25 Recommendation
375
4150
5300
6600
71200
82400
94800
10 9600
11 19,200
12 48,000
13 Reserved according to the ITU-T X.25 Recommendation
14 Reserved according to the ITU-T X.25 Recommendation
15 Reserved according to the ITU-T X.25 Recommendation
Default: 2
Units: Integers
Range: 1 through 7 (used with L3MOD8); 1 through 15 (used with L3MOD128)