X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem

X25AM Configuration and Management Manual—523424-004

4-14

Command Syntax for the ADD Command

attribute-spec

is a specification of an attribute and a value to be assigned to it. If you use the

LIKE option, attribute-spec overrides the value assigned to the attribute by

the LIKE option.

The attribute-spec for an SU object is one of the following attribute-name-and-

value combinations. Note that X25AM requires the first three attributes. The attributes

are listed alphabetically in Section 5, Attribute Descriptions.

{ DEVTYPE ( integer,integer ) }

{ PROTOCOL { ITI | NAM | PTP | QLLC } }

{ RECSIZE integer }

[ ACCEPTCHG { ON | OFF } ]

[ BCUG { integer | RESET } ]

[ BPADPARMS { ( integer,integer

[ integer,integer ]...) | RESET } ]

[ CPADPARMS { ( integer,integer

[ integer,integer ]...) | RESET } ]

[ CUD { “hex string” | RESET } ]

[ CUG { integer | RESET } ]

[ CUGTYPE { BASIC | EXT | BASICOA | EXTOA } ]

[ DDNPREC { integer | RESET } ]

[ DDNSERVICE { BASIC | STANDARD } ]

[ DESTADDR { “address” | RESET } ]

[ LOCALADDREXT { “address” | RESET } ]

[ LOCALADDREXTTYPE integer ]

[ NEGOTIATE { PKTSIZE | L3WINDOW | THRUPUT... } ]

[ NONEGOTIATE { PKTSIZE | L3WINDOW | THRUPUT... } ]

[ NULLFILL { ON | OFF } ]

[ PAGE6520BLKSIZE integer ]

[ PARITY { EVEN | ODD | NONE } ]

[ PARITYCHK { ON | OFF } ]

[ PORT integer ]

[ PRICALL { ON | OFF } ]

[ PVC { integer | RESET } ]

[ REMOTEADDREXT { “address” | RESET } ]

[ REMOTEADDREXTTYPE integer ]

[ REMOTENET { DATANET | DATAPAC | DATEXP | DDN | DDXP | PSS |

X25 | X25NP | X25UD | X25XA | X25SA } ]

[ REVERSECHG { ON | OFF } ]

[ REXMITTIMEOUT time ]

[ RPOA { integer | ( integer [, integer ]... ) | RESET } ]

[ THRUPUT ( integer,integer ) ]

[ TRANSITDELAY { time | RESET } ]