X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem

X25AM Configuration and Management Manual—523424-004

4-19

Attribute-Spec for the ALTER LINE Command

The attribute-spec for a LINE object is one of the following attribute name and

value combinations. The attributes are listed alphabetically in Section 5, Attribute

Descriptions.

[ BCUG { integer | RESET } ]

[ BPADPARMS { ( integer , integer

[ integer , integer ]... ) | RESET } ]

[ CALLINGADDR { ON | OFF } ]

[ CALLS { NONE | INCOMING | OUTGOING | TWOWAY } ]

[ CHARACTERSET { EBCDIC | ASCII } ]

[ CLOCKMODE { DCE | DTE } ]

[ CLOCKSPEED CLOCKnnnn ]

[ CPADPARMS { ( integer , integer

[ integer , integer ]... ) | RESET } ]

[ CUG { integer | RESET } ]

[ CUGTYPE { BASIC | BASICOA | EXT | EXTOA ]

[ DDNPREC { integer | RESET } ]

[ DDNSERVICE { BASIC | STANDARD } ]

[ DEBUG { ON | OFF } ]

[ DSRTIMEOUT time ]

[ EMSFORFRMR integer ]

[ EXTFORMAT { ON | OFF } ]

[ FRAMEMODE { DCE | DTE } ]

[ IDLETIMEOUT time ]

[ INTERFACE { RS232 | RS422 | V25 } ]

[ L3MOD integer ]

[ L3WINDOW integer ]

[ NETID { DATANET | DATAPAC | DATEXP | DDN | DDXP | PSS |

X25 | X25NP | X25SA | X25UD | X25XA } ]

[ PAGE6520BLKSIZE integer ]

[ PROGRAM file-spec ]

[ PVCRANGE { ( integer , integer ) | RESET } ]

[ RETRIES integer ]

[ RPOA { [ ( ] integer

[ , integer , ... ] [ ) ] | RESET } ]

[ SRCADDR { address | RESET } ]

[ SVCRANGE { ( integer [ , integer ] ) | RESET } ]

[ SYNCS integer ]

[ T1TIMEOUT time ]

[ THRESHOLD integer ]

[ TRANSITDELAY { time | RESET } ]