X25AM Configuration and Management Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

100

SCF Commands for the X25AM Subsystem

X25AM Configuration and Management Manual—523424-004

4-20

Attribute-Spec for the ALTER SU Command

The attribute-spec for an SU object is one of the following attribute name and

value combinations. The attributes are listed alphabetically in Section 5, Attribute

Descriptions.

Examples of the ALTER Command

The following command alters the line named $X25P1, including the SVCRANGE, the

PVCRANGE, and the T1TIMEOUT value:

-> ALTER LINE $x25p1, SVCRANGE (41,50), PVCRANGE (1,2), &

-> T1TIMEOUT 10

[ ACCEPTCHG { ON | OFF } ]

[ BCUG { integer | RESET } ]

[ BPADPARMS { ( integer , integer

[ integer , integer ]... ) | RESET } ]

[ CPADPARMS { ( integer , integer

[ integer , integer ]... ) | RESET } ]

[ CUD { “hex string” | RESET } ]

[ CUG { integer | RESET } ]

[ CUGTYPE { BASIC | BASICOA | EXT | EXTOA } ]

[ DDNPREC { integer | RESET } ]

[ DDNSERVICE { BASIC | STANDARD } ]

[ DESTADDR { address | RESET } ]

[ DEVTYPE ( integer , integer ) ]

[ LOCALADDREXT { address | RESET } ]

[ LOCALADDREXTTYPE integer ]

[ NEGOTIATE { item | ( item [, item ]... ) } ]

[ NONEGOTIATE { item | ( item [, item ]... ) } ]

[ NULLFILL { ON | OFF } ]

[ PARITY { EVEN | ODD | NONE } ]

[ PARITYCHK { ON | OFF } ]

[ PORT integer ]

[ PRICALL { ON | OFF } ]

[ PROTOCOL { ITI | NAM | PTP | QLLC } ]

[ PVC { integer | RESET } ]

[ RECSIZE integer ]

[ REMOTEADDREXT { address | RESET } ]

[ REMOTEADDREXTTYPE integer ]

[ REMOTENET { DATANET | DATAPAC | DATEXP | DDN | DDXP | PSS |

X25 | X25NP | X25UD | X25XA | X25SA } ]

[ REXMITTIMEOUT time ]

[ REVERSECHG { ON | OFF } ]

[ RPOA { [ ( ] integer

[ , integer , ... ] [ ) ] | RESET } ]

[ THRUPUT ( integer , integer ) ]

[ TRANSITDELAY { time | RESET } ]