X25AM Configuration and Management Manual

SCF Commands for the X25AM Subsystem

X25AM Configuration and Management Manual—523424-004

4-26

INFO Command

The INFO command displays the current values of the attributes for lines and

subdevices. This is a nonsensitive command.

Command Syntax for the INFO Command

Syntax:

OUT file-spec

causes any SCF output generated for this command to be directed to the specified

file.

LINE line-name | SU su-name

specifies information for a particular line or subdevice. If you omit line-name or

su-name, SCF displays the attribute values for the assumed object (for information

about the ASSUME command, see the SCF Reference Manual for G-Series RVUs

or SCF Reference Manual for H-Series RVUs).

DETAIL

causes detailed information to be displayed. If you omit DETAIL, you only one line

of information for each object.

SUB [ subtype ]

selects the subordinate objects that the command affects. subtype can be a

subordinate object type or one of the keywords ONLY or ALL.

If you name a subordinate object type, only objects of that type are affected. ONLY

specifies that only the subordinate objects are affected. ALL specifies that the

named object and the subordinate objects are affected. If you omit subtype, ALL

is assumed.

Display for the INFO LINE Command

The format of the display for the INFO LINE command without the DETAIL option is:

INFO [ / OUT file-spec / ] [ LINE line-name | SU su-name ]

[ , DETAIL ] [ , SUB [ subtype ] ]

X25AM Info LINE

Name L3Window PacketSize Type Retries FrameMode

$X25P1 2 256 (61,63) 10 DTE