X25AM Management Programming Manual
Commands and Responses
X25AM Management Programming Manual—528037-001
6-59
DISCONNECT Command
For command-specific information about these error numbers, see Error-Handling
Notes on page 6-59. For descriptions of all X25AM error numbers, see
Appendix A, Error Numbers and Error Lists.
ZSPI-TKN-ERRLIST
is a standard SPI error list, as described in the SPI Programming Manual. The list
ends with the token ZSPI-TKN-ENDLIST.
Operational Notes
•
DISCONNECT is a sensitive command.
•
The line associated with the subdevice being disconnected must be in the
STARTED summary state when this command is issued.
•
No summary-state transition is associated with this command.
Error-Handling Notes
•
The error identified by the error number ZCOM-ERR-OBJNAME-INV is returned if
the object name in the command is one of the reserved subdevice names.
•
If an attempt is made to disconnect a subdevice whose associated line is not in the
STARTED summary state, the error identified by the error number ZCOM-ERR-
CMD-INV-IN-SUMSTATE is returned.
512 (ZX25-ERR-OBJ-NAME-NOT-SUPP): The object name is not supported
by the X25AM subsystem.
516 (ZX25-ERR-DISCON-PVC-NOT-SUP): The DISCONNECT command is
not supported when the circuit is
PVC.
4999 (ZX25-ERR-EMPTY-RESPONSE): The empty response record is
being returned.