X25AM Management Programming Manual

Commands and Responses
X25AM Management Programming Manual—528037-001
6-74
INFO Command
ZIDLE-TIMEOUT
contains the time interval to wait before transmitting level-2 Receive Ready
(RR). This field corresponds to the SYSGEN modifier L2IDLETIMEOUT.
ZIDLE-CMD-RR
indicates whether or not a command RR is sent when the line is idle. This field
can have one of the following values:
ZINTRF
indicates the electrical interface of the controller. This field can have one of the
following values:
ZL2-DISC
indicates whether the line sends out DISC or SABM. This field can have one of
the following values:
ZL2-WINDOW
contains the number of frames that can be sent without receiving an
acknowledgment, or received before an acknowledgment is sent.
ZL3-MOD
indicates whether the modulus for the packet counters is 8 or 128. This field
can have one of the following values:
This field corresponds to the SYSGEN modifier L3MODULUS.
ZL3-WINDOW
contains the number of packets that can be out-standing without an
acknowledgment from the network. This field corresponds to the SYSGEN
modifier L3WINDOW.
ZSPI-VAL-TRUE A command RR is sent when the line is idle.
ZSPI-VAL-FALSE A response RR is sent when the line is idle.
ZX25-VAL-INTRF-RS232 The electrical interface is RS-232. This value
corresponds to the SYSGEN modifier RS232.
ZX25-VAL-INTRF-RS422 The electrical interface is RS-422. This value
corresponds to the SYSGEN modifier RS422.
ZSPI-VAL-TRUE The line sends out DISC.
ZSPI-VAL-FALSE The line sends out SABM.
ZSPI-VAL-TRUE The modulus for packet counters is 128.
ZSPI-VAL-FALSE The modulus for packet counters is 8.