X25AM Management Programming Manual

Commands and Responses
X25AM Management Programming Manual—528037-001
6-75
INFO Command
ZLINE-TYPE
is a pair of integers that contains the type and subtype of the line. The line type
is 61. The subtype is 63 for 6100 CSS controllers, 62 for 3681 MFC controllers,
and 0 through 61 for other controllers.
ZNETID
indicates the X.25 Public Data Network (PDN) that the X25AM subsystem is
communicating with. This value is used to establish the addressing
conventions required by the network. This field can have one of the following
values:
ZX25-VAL-NETID-DATANET The addressing conventions for the DATANET
network are being used. This value corresponds
to the SYSGEN modifier DATANET.
ZX25-VAL-NETID-DATAPAC The addressing conventions for the DATAPAC
network are being used. This value corresponds
to the SYSGEN modifier DATAPAC.
ZX25-VAL-NETID-DATEXP The addressing conventions for the DATEX-P
network are being used. This value corresponds
to the SYSGEN modifier DATEXP.
ZX25-VAL-NETID-DDXP The addressing conventions for the DDXP (NTT)
network are being used. This value corresponds
to the SYSGEN modifiers DDXP and NTT.
ZX25-VAL-NETID-PSS The addressing conventions for the PSS network
are being used. This value corresponds to the
SYSGEN modifier PSS.
ZX25-VAL-NETID-TELENET The addressing conventions for the TELENET
network are being used. This value corresponds
to the SYSGEN modifier TELENET.
ZX25-VAL-NETID-TRANSPAC The addressing conventions for the TRANSPAC
network are being used. This value corresponds
to the SYSGEN modifier TRANSPAC.
ZX25-VAL-NETID-TYMNET The addressing conventions for the TYMNET
network are being used. This value corresponds
to the SYSGEN modifier TYMNET.
ZX25-VAL-NETID-X25 The addressing conventions of the generic netid
X25 are being used. This value corresponds to
the SYSGEN modifier X25.
ZX25-VAL-NETID-X25NP The addressing conventions of the generic netid
X25NP are being used. This value corresponds
to the SYSGEN modifier X25NP.