X25AM Management Programming Manual

Commands and Responses
X25AM Management Programming Manual528037-001
6-82
INFO Command
ZPARITY-CHECK
indicates whether or not parity checking is enabled. This field can have one of
the following values:
If enabled, parity checking is performed as specified by the value of the field
ZPARITY. This field is meaningful only if the protocol is ITI.
ZPORT
contains the logical port number being used by the subdevice.
ZPRI-CALL
indicates whether or not the capability of making priority calls is enabled. This
field can have one of the following values:
This field applies only to the DATAPAC network.
ZPVC
contains the channel number of the Permanent Virtual Circuit (PVC) that the
subdevice is bound with. If this field contains its null value, there is no PVC
assigned to this subdevice. The value must be within the line PVCRANGE.
ZRMT-NET
indicates the addressing conventions that are used when building the called
address in a call-request packet. This field can have one of the following
values:
ZSPI-VAL-TRUE Parity checking is enabled.
ZSPI-VAL-FALSE Parity checking is disabled.
ZSPI-VAL-TRUE The capability of making priority calls is enabled.
ZSPI-VAL-FALSE The capability of making priority calls is disabled.
ZX25-VAL-NETID-DATANET The addressing conventions for the DATANET
network are being used.
ZX25-VAL-NETID-DATAPAC The addressing conventions for the DATAPAC
network are being used.
ZX25-VAL-NETID-DATEXP The addressing conventions for the DATEX-P
network are being used.
ZX25-VAL-NETID-DDXP The addressing conventions for the DDXP (NTT)
network are being used.
ZX25-VAL-NETID-PSS The addressing conventions for the PSS network
are being used.
ZX25-VAL-NETID-TELENET The addressing conventions for the TELENET
network are being used.